PDA

View Full Version : Some help with 3 electrodes please (Polarity Problem)


Jack Frost
09-11-2008, 08:35 PM
I got Corona w/ U-amp, Testicular Tube and Mid-ring.


First thing I did was saw the mid-ring was too big for me, then later on when I was FULLY errect, I realized I cut it too short... ARGH! I read not to do this, and I thought I was doing the right thing, and I still botched that up. There's an $80 mistake I guess :( I pulled each end of the tube off the metal part 1/8th inch on each side and that makes it fit okay, but now there's a gap.


Onto the real problem.

With the mid-ring on, I get wayyy too much stim to the corona. I tried switching the polarity of the green/yellow and black/red all the possible combinations and no matter what, it just seems to wierd!

Also if I made the polarity such that the midring matches the testicular tube, I have a problem with the mid-ring HITTING the testicular tube causing a short and all feeling goes away. Not sure what to do about this.

Anyone have advise on channel and polarity configuration for a setup like mine? I don't want so much stim in the corona, but do want some.