PES Box

[scollops]

Quick question - When I hook up the Acrylic Anal plug on its own - get some really good stimulation. Once I connect up the sparkler and base ring, I have to turn the power on full to get any real effect, where as before I was looking at about 4-5 setting for comfortable.

I am using power not battery - Do I need to mix up the channels or is 3 items pushing it ? i wanted to get full anal stim with at least the sparkler - but to complete the circuit I had to use the base ring.

If you isolate each channel the stim is very intense - just when you you use both channels you have to crank everything up but still not as strong - is this the norm ?

[Anna]

Actually, with our box you don't need to have a second complete circuit. Yes, you might want to use fewer items at once to increase the effectiveness of the stimulation. Yes, you can connect the Sparkler with the Acrylic Plug and leave out the Base Ring.

You might try connecting the Sparkler with one side of the Acrylic and then hook up the remaining side of the Plug without a second electrode. It should work. The box has two channels but they share a common ground thus the ability to use three single electrodes without two complete circuits.

The sensations are more intense if you only use two to three electrodes vs using all four connections.

I hope this helps.
Later!

[scollops]

Cheers Anna - guess I need to experiment.

[gooey]

You might try one lead from pol A on anal plug to B on penile ring. Then the other lead to sparkler to the other pol on the anal plug. You have to try each end to see which way will give the best power. This is kind of confusing I know. Sorry